diff -Nru dovecot-1.2.rc4.orig/dovecot-example.conf dovecot-1.2.rc4/dovecot-example.conf --- dovecot-1.2.rc4.orig/dovecot-example.conf 2009-05-18 12:42:23.000000000 +0200 +++ dovecot-1.2.rc4/dovecot-example.conf 2009-05-18 12:44:52.000000000 +0200 @@ -17,11 +17,11 @@ # --sysconfdir=/etc --localstatedir=/var --with-ssldir=/etc/ssl # Base directory where to store runtime data. -#base_dir = /var/run/dovecot/ +base_dir = /var/run/dovecot/ # Protocols we want to be serving: imap imaps pop3 pop3s # If you only want to use dovecot-auth, you can set this to "none". -#protocols = imap imaps +protocols = imaps pop3s # A space separated list of IP or host addresses where to listen in for # connections. "*" listens in all IPv4 interfaces. "[::]" listens in all IPv6 @@ -92,8 +92,8 @@ # dropping root privileges, so keep the key file unreadable by anyone but # root. Included doc/mkcert.sh can be used to easily generate self-signed # certificate, just make sure to update the domains in dovecot-openssl.cnf -#ssl_cert_file = /etc/ssl/certs/dovecot.pem -#ssl_key_file = /etc/ssl/private/dovecot.pem +ssl_cert_file = /etc/ssl/certs/dovecot.crt +ssl_key_file = /etc/ssl/keys/dovecot.key # If key file is password protected, give the password here. Alternatively # give it when starting dovecot with -p parameter. Since this file is often @@ -136,7 +136,7 @@ # which login needs to be able to connect to. The sockets are created when # running as root, so you don't have to worry about permissions. Note that # everything in this directory is deleted when Dovecot is started. -#login_dir = /var/run/dovecot/login +login_dir = /var/run/dovecot/login # chroot login process to the login_dir. Only reason not to do this is if you # wish to run the whole Dovecot without roots. @@ -146,7 +146,7 @@ # and don't use it anywhere else. The user must also belong to a group where # only it has access, it's used to control access for authentication process. # Note that this user is NOT used to access mails. -#login_user = dovecot +login_user = dovecot # Set max. process size in megabytes. If you don't use # login_process_per_connection you might need to grow this. @@ -156,10 +156,10 @@ # login process be allowed to process multiple connections (no)? Yes is more # secure, espcially with SSL/TLS enabled. No is faster since there's no need # to create processes all the time. -#login_process_per_connection = yes +login_process_per_connection = no # Number of login processes to keep for listening new connections. -#login_processes_count = 3 +login_processes_count = 1 # Maximum number of login processes to create. The listening process count # usually stays at login_processes_count, but when multiple users start logging @@ -221,7 +221,7 @@ # # # -#mail_location = +mail_location = mbox:~/Mail:INBOX=/var/spool/mail/%u # If you need to set multiple mailbox locations or want to change default # namespace settings, you can do it by defining namespace sections. @@ -382,7 +382,7 @@ # non-valid GID as primary group ID aren't allowed to log in. If user # belongs to supplementary groups with non-valid GIDs, those groups are # not set. -#first_valid_gid = 1 +first_valid_gid = 100 #last_valid_gid = 0 # Maximum number of running mail processes. When this limit is reached, @@ -537,20 +537,20 @@ protocol imap { # Login executable location. - #login_executable = /usr/libexec/dovecot/imap-login + login_executable = /usr/lib/dovecot/imap-login # IMAP executable location. Changing this allows you to execute other # binaries before the imap process is executed. # # This would write rawlogs into user's ~/dovecot.rawlog/, if it exists: - # mail_executable = /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/imap + # mail_executable = /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap # # # This would attach gdb into the imap process and write backtraces into # /tmp/gdbhelper.* files: - # mail_executable = /usr/libexec/dovecot/gdbhelper /usr/libexec/dovecot/imap + # mail_executable = /usr/lib/dovecot/gdbhelper /usr/lib/dovecot/imap # - #mail_executable = /usr/libexec/dovecot/imap + mail_executable = /usr/lib/dovecot/imap # Maximum IMAP command line length in bytes. Some clients generate very long # command lines with huge mailboxes, so you may need to raise this if you get @@ -614,11 +614,11 @@ protocol pop3 { # Login executable location. - #login_executable = /usr/libexec/dovecot/pop3-login + login_executable = /usr/lib/dovecot/pop3-login # POP3 executable location. See IMAP's mail_executable above for examples # how this could be changed. - #mail_executable = /usr/libexec/dovecot/pop3 + mail_executable = /usr/lib/dovecot/pop3 # Don't try to set mails non-recent or seen with POP3 sessions. This is # mostly intended to reduce disk I/O. With maildir it doesn't move files @@ -657,7 +657,7 @@ # Dovecot's default, so if you're building a new server it would be a good # idea to change this. %08Xu%08Xv should be pretty fail-safe. # - #pop3_uidl_format = %08Xu%08Xv + pop3_uidl_format = %08Xu%08Xv # POP3 logout format string: # %i - total number of bytes read from client @@ -720,7 +720,7 @@ #deliver_log_format = msgid=%m: %$ # Binary to use for sending mails. - #sendmail_path = /usr/lib/sendmail + #sendmail_path = /usr/sbin/sendmail # Subject: header to use for rejection mails. You can use the same variables # as for rejection_reason below. @@ -739,7 +739,7 @@ ## # Executable location -#auth_executable = /usr/libexec/dovecot/dovecot-auth +auth_executable = /usr/lib/dovecot/dovecot-auth # Set max. process size in megabytes. #auth_process_size = 256 @@ -868,7 +868,7 @@ # database (passwd usually), you can use static userdb. # REMEMBER: You'll need /etc/pam.d/dovecot file created for PAM # authentication to actually work. - passdb pam { + #passdb pam { # [session=yes] [setcred=yes] [failure_show_msg=yes] [max_requests=] # [cache_key=] [] # @@ -901,7 +901,7 @@ # args = session=yes %Ls # args = cache_key=%u dovecot #args = dovecot - } + #} # System users (NSS, /etc/passwd, or similiar) # In many systems nowadays this uses Name Service Switch, which is @@ -914,10 +914,10 @@ # Shadow passwords for system users (NSS, /etc/shadow or similiar). # Deprecated by PAM nowadays. # - #passdb shadow { + passdb shadow { # [blocking=yes] - See userdb passwd for explanation #args = - #} + } # PAM-like authentication for OpenBSD. #