REQUIREMENTS

PRE-INSTALL

POST-INSTALL

	* Run depmod -a

	* You may edit your /etc/modprobe.conf, I use this settings:

alias em8300-1 off
alias char-major-121 em8300
install em8300 /sbin/modprobe bt865 && /sbin/modprobe --ignore-install em8300
options em8300 dicom_fix=0 dicom_control=0 dicom_other_pal=0

	* Edit /etc/rc.modules to load the modules at boot time.

	* You may also run em8300setup to change the default parameters.

	* If you are using udev, you may want to create 
	  /etc/udev/rules.d/xx-em8300.rules with something like:

KERNEL=="em8300*", NAME="%k", OWNER="root", GROUP="em8300", MODE="660"


PRECAUTION
	This port builds em8300 with NTSC by default.
	After installing this port you need to rebuild mplayer to
	add dxr3 support.